Milling

13 Items

Sort By Name Set Descending Direction
Ratio end mills Alu RF 100 AL
Ratio end mills Alu RF 100 AL
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: e8
    Tolerance on Ø: e8
    Tolerance on Ø: e8
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: W
    Type: W
    Type: W
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 10
    Picto back rake angle (Article No.): 10
    Picto back rake angle (Article No.): 10
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 4265 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100
Ratio end mills RF 100
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: e8
    Tolerance on Ø: e8
    Tolerance on Ø: e8
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: W
    Type: W
    Type: W
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Helix angle: 39/40/41
    Helix angle: 39/40/41
    Helix angle: 39/40/41
  • Picto chamfer (Article No.): 90
    Picto chamfer (Article No.): 90
    Picto chamfer (Article No.): 90
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 10
    Picto back rake angle (Article No.): 10
    Picto back rake angle (Article No.): 10
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 6775 Diameter range:
3,175 - 19,050 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100 diver
Ratio end mills RF 100 diver
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 36/38/37
    Helix angle: 36/38/37
    Helix angle: 36/38/37
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 6757 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100 diver
Ratio end mills RF 100 diver
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Picto chamfer (Article No.): R005
    Picto chamfer (Article No.): R005
    Picto chamfer (Article No.): R005
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
    Picto Copying (Article No.): copying
SKU: 6759 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100 diver
Ratio end mills RF 100 diver
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: e8
    Tolerance on Ø: e8
    Tolerance on Ø: e8
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Signum
    Surface: Signum
    Surface: Signum
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Helix angle: 41/43/45
    Helix angle: 41/43/45
    Helix angle: 41/43/45
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 6872 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100 Speed M
Ratio end mills RF 100 Speed M
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: TiAlN-nanoA
    Surface: TiAlN-nanoA
    Surface: TiAlN-nanoA
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: NH
    Type: NH
    Type: NH
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
    Picto back rake angle (Article No.): 9
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 6773 Diameter range:
3,175 - 19,050 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100 VA
Ratio end mills RF 100 VA
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: TiAlN-nanoA
    Surface: TiAlN-nanoA
    Surface: TiAlN-nanoA
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 3080 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF 100 VA
Ratio end mills RF 100 VA
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: TiAlN-nanoA
    Surface: TiAlN-nanoA
    Surface: TiAlN-nanoA
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): short
    Picto lenght (Article No.): short
    Picto lenght (Article No.): short
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 4257 Diameter range:
3,175 - 19,050 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF Microdiver
Ratio end mills RF Microdiver
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Cutting depth: 2.5xD
    Cutting depth: 2.5xD
    Cutting depth: 2.5xD
  • Tolerance on Ø: h8
    Tolerance on Ø: h8
    Tolerance on Ø: h8
  • Internal cooling: with
    Internal cooling: with
    Internal cooling: with
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Perrox
    Surface: Perrox
    Surface: Perrox
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: NH
    Type: NH
    Type: NH
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Identification (Article No.): ERWEITERT
    Identification (Article No.): ERWEITERT
    Identification (Article No.): ERWEITERT
  • No of cutting edges: 3
    No of cutting edges: 3
    No of cutting edges: 3
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 40
    Helix angle: 40
    Helix angle: 40
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): 2,5xD
    Picto lenght (Article No.): 2,5xD
    Picto lenght (Article No.): 2,5xD
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 11
    Picto back rake angle (Article No.): 11
    Picto back rake angle (Article No.): 11
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 6808 Diameter range:
0,500 - 3,175 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills RF Microdiver
Ratio end mills RF Microdiver
  • Connection code machine side: straight shank
    Connection code machine side: straight shank
    Connection code machine side: straight shank
  • Cutting depth: 5xD
    Cutting depth: 5xD
    Cutting depth: 5xD
  • Tolerance on Ø: h8
    Tolerance on Ø: h8
    Tolerance on Ø: h8
  • Internal cooling: with
    Internal cooling: with
    Internal cooling: with
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: Perrox
    Surface: Perrox
    Surface: Perrox
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: NH
    Type: NH
    Type: NH
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Identification (Article No.): ERWEITERT
    Identification (Article No.): ERWEITERT
    Identification (Article No.): ERWEITERT
  • No of cutting edges: 3
    No of cutting edges: 3
    No of cutting edges: 3
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 40
    Helix angle: 40
    Helix angle: 40
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): 5xD
    Picto lenght (Article No.): 5xD
    Picto lenght (Article No.): 5xD
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 11
    Picto back rake angle (Article No.): 11
    Picto back rake angle (Article No.): 11
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 6809 Diameter range:
0,500 - 3,175 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
Ratio end mills standard RF 100 U
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 3114 Diameter range:
3,175 - 31,750 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio milling cutters RF 100 U
Ratio milling cutters RF 100 U
  • Connection code machine side: DIN 6535-HA/HB
    Connection code machine side: DIN 6535-HA/HB
    Connection code machine side: DIN 6535-HA/HB
  • Tolerance on Ø: e8
    Tolerance on Ø: e8
    Tolerance on Ø: e8
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
    Picto Drilling (Article No.): drilling
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 4255 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio milling cutters RF 100 U
Ratio milling cutters RF 100 U
  • Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
    Connection code machine side: ~DIN 6535-HA/HB
  • Tolerance on Ø: e8
    Tolerance on Ø: e8
    Tolerance on Ø: e8
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
    Picto back rake angle (Article No.): 7
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
SKU: 4254 Diameter range:
3,175 - 25,400 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.

13 Items